HP Color LaserJet CP3520 Printer Series - Manual (Page 36)

Print Quality menu
To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the
PRINT QUALITY menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Sub-item Values Description
ADJUST COLOR HIGHLIGHTS
● CYAN DENSITY
● MAGENTA DENSITY
● YELLOW DENSITY
● BLACK DENSITY
Range from +5 to –5.
Default is 0. Adjust the darkness or lightness of highlights on a
printed page. Lower values represent lighter
highlights on a printed page, and higher values
represent darker highlights on a printed page.
MIDTONES
● CYAN DENSITY
● MAGENTA DENSITY
● YELLOW DENSITY
● BLACK DENSITY
Range from +5 to –5.
Default is 0. Adjust the darkness or lightness of midtones on a
printed page. Lower values represent lighter
midtones on a printed page, and higher values
represent darker midtones on a printed page.
SHADOWS
● CYAN DENSITY
● MAGENTA DENSITY
● YELLOW DENSITY
● BLACK DENSITY
Range from +5 to –5.
Default is 0. Adjust the darkness or lightness of shadows on a
printed page. Lower values represent lighter
shadows on a printed page, and higher values
represent darker shadows on a printed page.
RESTORE COLOR VALUES Restore the color settings by resetting the density
values of each color.
SET REGISTRATION For each tray, setting the registration shifts the
margin alignment to center the image on the page
from top to bottom and from left to right. You can
also align the image on the front with the image
printed on the back.
ADJUST TRAY <X> Shift from -20 to 20
along the X or Y axes. 0
is the default. Perform the alignment procedure for each tray.
When it creates an image, the product scans
across the page from side to side as the sheet
feeds from top to bottom into the product.
PRINT TEST PAGE Print a test page for setting the registration.
X1 SHIFT
Y1 SHIFT
X2 SHIFT
Y2 SHIFT
The scan direction is referred to as X. X1 is the
scan direction for a single-sided page or for the first
side of a two-sided page. X2 is the scan direction
for the second side of a two-sided page.
The feed direction is referred to as Y. Y1 is the feed
direction for a single-sided page or for the first side
of a two-sided page. Y2 is the feed direction for the
second side of a two-sided page.
24 Chapter 2 Control panel ENWW