HP Color LaserJet CP3520 Printer Series - Manual (Page 42)

Item Sub-item Values Description
(duplexing). Two options are
available:
● AUTO enables Smart
Duplexing, which instructs
the product not to process
both sides if the second side
is blank. This can improve
print speed.
● YES disables Smart
Duplexing and forces the
duplexer to flip the sheet of
paper even if it is printed on
only one side.
NOTE: This option is available
only for the HP Color LaserJet
CP3525dn printer or the HP Color
LaserJet CP3525x printer.
SLEEP DELAY 1 MINUTE
15 MINUTES*
30 MINUTES
45 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Reduces power consumption
when the product has been
inactive for the selected period.
WAKE TIME <DAY OF THE WEEK> OFF*
CUSTOM
Allows you to configure the daily
wake time for the product to avoid
warm-up or calibration time. Select
a day of the week and then select
CUSTOM. Set the wake time for
that day, and then choose whether
the wake time should be applied to
all days of the week.
OPTIMUM SPEED/ENERGY
USAGE FASTER FIRST PAGE*
SAVE ENERGY
Controls the fuser cool down
behavior.
If FASTER FIRST PAGE is
selected, the fuser is not allowed to
cool down, and the first page
processes faster for any new job
that is sent to the printer.
If SAVE ENERGY is selected, the
fuser is allowed to cool down
naturally. The speed penalty on the
first page depends on how long the
fuser has been sitting idle.
DISPLAY BRIGHTNESS Range is –10 through 10. Sets the brightness of the control
panel display. The default is 0.
30 Chapter 2 Control panel ENWW