Enable memory for windows – HP Color LaserJet CP3520 Printer Series User Manual
Page 164
10.
Reconnect the power cable and interface cables, and turn the product on.
Enable memory for Windows
1.
Windows XP, Windows Server 2003, and Windows Server 2008 (using the default Start menu
view): Click Start, click Settings, and then click Printers and Faxes.
-or-
Windows XP, Windows Server 2003, and Windows Server 2008 (using the Classic Start menu
view): Click Start, click Settings, and then click Printers.
-or-
Windows Vista: Click Start, click Control Panel, and then in the category for Hardware and
Sound click Printer.
2.
Right-click the driver icon, and then select Properties.
3.
Click the Device Settings tab.
4.
Expand the area for Installable Options.
5.
Select the total amount of memory installed in the product.
6.
Next to Automatic Configuration, select Update Now.
7.
Click OK.
Install an HP Jetdirect or EIO print server card or EIO hard disk
This product is equipped with an external I/O (EIO) slot. You can install an additional HP Jetdirect print
server card or external EIO hard drive in the available EIO slot.
152 Chapter 10 Manage and maintain the product
ENWW