HP Color LaserJet CP3520 Printer Series User Manual
Page 163
7.
Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an
angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the
metal contacts are not visible.
XO
XO
XO
XO
XO
XO
XOXOXOXOXOXO
XO
XOX
OX
OXO
XOXO
XO
XO
XO
XOX
OXOX
OX
O
XOXO
XOX
OXO
XOXOXOXOXOXO
XOXO
XO
XO
XO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XO
XO
XO
XO
XO
XO
XOXOXOXO
XO
XO
XO
XO
XO
XO
XOXOXO
8.
Push down on the DIMM until both latches engage the DIMM.
XO
XO
XO
XO
XO
XO
XOXOXOXOXOXO
XOXOXOXOXOXO
XOXO
XO
XOX
O
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XO
XO
XO
XO
X
O
XO
XOXOXOXO
XO
XOX
O
XO
XO
XO
XOXOXO
XIO
XI
OX
IXO
O
XIXO
XIO
XIO
XIO
XI
OX
IXO
O
XIXO
XIO
XIO
XIO
XIO
XIXO
O
XIXO
XIO
XIO
XI
OX
IO
XIXO
OX
IXO
XIO
XIO
NOTE:
If you have difficulty inserting the DIMM, make sure the notch on the bottom of the DIMM
is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are using the
correct type of DIMM.
9.
Align the formatter board in the tracks at the bottom of the slot, and then slide the board back into
the product.
NOTE:
To prevent damage to the formatter board, ensure the formatter board is aligned in the
tracks at the top and the bottom of the opening.
ENWW
Replace supplies 151