HP Color LaserJet CP3520 Printer Series - Manual (Page 85)

Disable network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the
following benefits:
● Decreases product-generated network traffic
● Prevents unauthorized users from printing to the product
● Provides only pertinent information on the configuration page
● Allows the product control panel to display protocol-specific error and warning messages
Disable IPX/SPX, AppleTalk, or DLC/LLC
NOTE: Do not disable IPX/SPX in Windows-based systems that print through IPX/SPX.
1. Press the Menu button .
2. Press the down arrow to highlight the CONFIGURE DEVICE menu, and then press the OK
button.
3. Press the down arrow to highlight the I/O menu, and then press the OK button.
4. Press the down arrow to highlight the EMBEDDED JETDIRECT MENU option, and then press
the
OK button.
5. Press the down arrow to highlight the IPX/SPX menu, and then press the OK button.
-or-
Press the down arrow to highlight the APPLETALK menu, and then press the OK button.
-or-
Press the down arrow to highlight the DLC/LLC menu, and then press the OK button.
6. Press the OK button to select the ENABLE setting.
7. Press the down arrow to highlight the OFF setting, and then press the OK button.
8. Press the Menu button to return to the Ready state.
ENWW Network configuration 73