HP Color LaserJet CP3520 Printer Series - Manual (Page 181)

Control panel message Description Recommended action
13.XX.YY JAM ABOVE TOP OUTPUT BIN A jam has occurred in the output area. For instructions on clearing the jam, see
Clear jams in the output bin area
on page 192
.
13.XX.YY JAM IN LOWER RIGHT DOOR A jam has occurred in the lower right door
(Tray 3). For instructions on clearing the jam, see
Clear jams in the lower right door (Tray 3)
on page 196
.
13.XX.YY JAM IN RIGHT DOOR A jam has occurred in the duplex and feed
area inside the right door. For instructions on clearing the jam, see
Clear jams in the right door on page 188 .
13.XX.YY JAM IN TRAY 1 A jam has occurred in Tray 1. For instructions on clearing the jam, see
Clear jams in Tray 1 on page 193 .
13.XX.YY JAM IN TRAY 3 A jam has occurred in the indicated tray. For instructions on clearing the jam, see
Clear jams in Tray 2 on page 195 or Clear
jams in the optional 500-sheet paper and
heavy media tray (Tray 3) on page 196
.
13.XX.YY JAMS IN RIGHT DOOR A jam has occurred in the fuser area. CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
For instructions on clearing the jam, see
Clear jams in the right door on page 188 .
20 INSUFFICIENT MEMORY
To continue press OK
The product received more data than can fit
in the available memory. You might have tried
to transfer too many macros, soft fonts, or
complex graphics. Press the OK button to print the transferred
data (some data might be lost), and then
simplify the print job or install additional
memory.
22 EIO X BUFFER OVERFLOW
To continue press OK
Too much data was sent to the EIO card in
the specified slot (x). An incorrect
communications protocol might be in use. Press the OK button to print the transferred
data. (Some data might be lost.)
Check the host configuration. If this message
persists, contact an HP-authorized service or
support provider. (See the HP support flyer,
or go to
www.hp.com/support/cljcp3525 .)
22 EMBEDDED I/O BUFFER OVERFLOW
To continue press OK
Too much data was sent to the embedded
HP Jetdirect print server. Press the OK button to print the transferred
data. (Some data might be lost.)
Check the host configuration. If this message
persists, contact an HP-authorized service or
support provider. (See the HP support flyer,
or go to
www.hp.com/support/cljcp3525 .)
22 USB I/O BUFFER OVERFLOW
To continue press OK
The product's USB buffer has overflowed. Press the OK button to print the transferred
data. (Some data might be lost.)
Check the host configuration. If this message
persists, contact an HP-authorized service or
support provider. (See the HP support flyer,
or go to
www.hp.com/support/cljcp3525 .)
If the message persists, contact HP Support
at
www.hp.com/support/cljcp3525 .
40 EIO X BAD TRANSMISSION
To continue press OK
The connection between the product and the
EIO card in the specified slot has been
broken. Press the OK button to clear the error
message and continue printing.
Try to reinstall the EIO card.
40 EMBEDDED I/O BAD TRANSMISSION A temporary printing error has occurred. Press the OK button to clear the error
message. (Data will be lost.)
Table 11-1 Control-panel messages (continued)
ENWW Control-panel messages 169