Single stage installation – ATEN PN9108U User Manual
Page 26
Single Stage Installation
In a Single Stage installation, there are no additional PN9108U Stations daisy
chained down from the first unit. To set up a single stage installation, refer to
the installation diagram below (the numbers in the diagram correspond to the
numbered steps), and do the following:
1. For each device, use an AC Output cable to connect from any available
PN9108U output port to the device’s AC socket.
2. Safe Shutdown is supported for computers running Windows 98SE, ME,
NT, 2000, XP, and 2003 Server.
If you choose to utilize the Safe Shutdown feature (use of this feature is
optional), for each computer use a Safe Shutdown cable to connect from
the PN9108U’s Safe Shutdown port to the computer’s Serial port.
Note: You must connect the computer to the same letter designation for
both the AC Outlet and Safe Shutdown port.
2005-09-07
PN9108U User Manual
12