ATEN PN9108U - Manual (Page 60)

2. Select the device whose address you wish to determine in the Device List.
M If the list is empty, or your device doesn’t appear, click Enumerate to
refresh the Device List.
M If there is more than one device in the list, use the MAC address to
pick the one you want. The PN9108U’s MAC address is located on its
bottom panel.
3. Select either Obtain an IP address automatically (DHCP), or Specify an
IP address. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
4. Click Set IP.
5. After the IP address shows up in the Device List, click Exit to end the
program.
Method 2:
1. Set your computer’s IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60)
is the default address of the PN9108U.)
2. Specify the switch’s default IP address (192.168.0.60) in your browser,
and you will be able to connect.
3. Assign a fixed IP address for the PN9108U that is suitable for the network
segment that it resides on.
4. After you log out, be sure to reset your computer’s IP address to its
original value.
2005-09-07
PN9108U User Manual
46