ATEN PN9108U - Manual (Page 44)

Outlet Groups:
The bottom Configuration panel (refer back to p. 27) lets you select the
outlets that you want to put together as an outlet group. Outlet groups enable
control actions to be carried out on the entire group at the same time, rather
than repeatedly performing the same action on each individual outlet. You
can have four outlet groups per station, and each group can be given a
distinctive name. The maximum number of characters for the name is 15.
UPS:
M The PN9108U provides simple signal UPS support. If you connect a UPS
to the PN9108U’s RS-232 port, and enable the UPS function, should the
main power be interrupted and the UPS kick in, the PN9108U can initiate
a safe shutdown for all of the computers that have been cabled and
configured for a safe shutdown.
M To enable the UPS function:
M Put a check in the Enable UPS checkbox
M Configure the pin assignments and polarities according to the
documentation for your UPS.
M Set the power outlet configuration for each of the affected ports to one
of the safe shutdown options (see Safe Shutdown and Reboot, p. 12).
PN9108U
UPS
2005-09-07
PN9108U User Manual
30