ATEN PN9108U - Manual (Page 39)

Date / Time
The Date / Time function allows you to set the PN9108U’s system date and
time. When you click the Date / Time icon, the following dialog box appears:
The date and time settings that the PN9108U is currently set to appear in the
upper section. The large lower section offers three methods to set a new system
time:
M Automatically synchronizing the date and time with your computer
M Obtaining the date and time from an NTP server on the internet
M Setting the date and time manually.
If you enable Synchronize with NTP server, be sure to select the time zone
that corresponds to your location from the Time Zone list box.
Note: If you are behind a firewall, you must enable a port for the NTP
server.
2005-09-07
Chapter 4 - Administration
25