ATEN PN9108U - Manual (Page 38)

Dynamic IP Address:
To have the Station obtain its IP address automatically from a DHCP server,
select the DHCP radio button. When you do, the fields in the Network
Settings section are disabled, and a Mail Configuration panel appears:
You can use these Mail Configuration fields to ascertain the IP address that
was dynamically assigned to the PN9108U by doing the following:
1. Key in the domain name or IP address of the SMTP mail server for your
network in the top field.
2. If your server requires authentication, check the SMTP server requires
authentication checkbox and key in your account name and password in
the fields provided.
3. Key in the address of your email account in the Email From field.
4. Key in the email addresses of the users you want to receive the IP address
in the bottom field. This field can only accept 128 total characters.
Addresses can be comma, semicolon, or spacebar delimited.
5. When you are all done, click Save and Restart to close the dialog box
and reset the PN9108U.
Note: Be sure that the DNS setting is filled in with a value appropriate to the
network you are on.
2005-09-07
PN9108U User Manual
24