ATEN PN9108U User Manual

Page 42

Advertising
background image

The top Configuration panel allows you to set up a power management
configuration for each port. These settings determine what takes place when
you click the Power Button On or Off. The meanings of the field headings
are given in the following table:

Heading

Meaning

Station Name

To make things more convenient on a multi-station
installation, each station can be given a distinctive
name. To name a station key in the name of your
choice - up to 15 letters and numbers.

Outlet Name

Each outlet can be given a distinctive name. The
maximum number of characters is 15.

Modem Ring Resume*

This is a Safe Shutdown and Reboot option (see p. 12). If
this option is selected, when the Outlet’s Power Button is
clicked OFF, the PN9108U waits for the amount time set
in the Power Off Delay dialog box (see below), and then
performs a Safe Shutdown on the computer attached to
its Outlet. When the Power Button is clicked ON, the
PN9108U waits for the amount time set in the Power On
Delay
field (see below), and then restarts the computer.
The front panel LEDs flash while the action is pending.

Note: With this option, although the computer has been
turned off, it is still receiving power through the outlet.
Therefore, the computer can be locally (physically)
turned on or off - in which case the computer’s status
may not correspond with the Outlet Status display. The
gray “socket” icon flashes (instead of remains steady)
to remind you of this. To make sure that the computer
is in sync with the display, click the power On/Off/On
(or Off/On/Off) when making a power status change.

System after AC back*

This is a Safe Shutdown option (see p. 12). If this
option is selected, when the Outlet’s Power Button is
clicked OFF, the PN9108U waits for the amount time
set in the Power Off Delay dialog box (see below), and
then performs a Safe Shutdown on the computer
attached to its Outlet.

When the Power Button is clicked ON the PN9108U
waits for the amount time set in the Power On Delay
field (see below), and then restarts the computer.

Note: With this option power through the Outlet is cut
off. Although it was safely shutdown, the computer
does not receive any power through the outlet.

2005-09-07

PN9108U User Manual

28

Advertising