ATEN PN9108U User Manual
Page 55
Advertising
2. Click Next. A dialog box similar to the one below appears:
Select the options in the dialog box so that they match the settings shown
in the figure above.
3. Click Finish; click OK.
To check that the setup is working:
1. Navigate through the following folders: Control Panel
→ Administrative
Tools
→ Services.
2. In Services, scroll down until you see the Uninterruptible Power Supply
entry with Started for its status, as shown in the figure below:
2005-09-07
Chapter 5 - Safe Shutdown and Reboot
41
Advertising