ATEN PN9108U - Manual (Page 27)

3. Plug the LAN or WAN cable into the PN9108U’s RJ-45 socket.
4. If you choose to use a UPS (optional) plug its cable into the RS-232 port.
Note: The RS-232 port can also be used to provide out of band
connectivity by connecting a PA0140 Module to it. Contact your
dealer for details.
5. Use the AC power cord provided with this package to connect the
PN9108U’s Power Socket to an AC power source.
Note: We strongly advise that you do not plug the PN9108U into a multi
socket extension cord, since it may not receive enough amperage
to operate correctly.
Once you are cabled up, you can turn on the PN9108U and the connected
devices.
5
4
2
1
3
2005-09-07
Chapter 2 - Hardware Setup
13