ATEN PN9108U - Manual (Page 29)

Chapter 3.
Browser Operation
Logging In
The PN9108U is accessed with an internet browser.
Note: Browsers accessing the PN9108U must support SSL 128 bit
encryption.
1. Open your browser and specify the IP address of the PN9108U you want
to access in the browser’s URL location bar.
Note: 1. Get the IP address from the PN9108U administrator
2. If you are the administrator, and are logging in for the first
time, the various ways to determine the PN9108U’s IP address
are described in the Appendix on p. 45.
2. A Security Alert dialog box appears. Accept the certificate.
3. A login dialog box, like the one below, appears:
4. Provide a valid Username and Password (set by the PN9108U
administrator), then Click Login to continue.
Note: If you are the administrator, and are logging in for the first time,
use the default Username: administrator; and the default
Password: password. For security purposes, we strongly
recommend you remove these and give yourself a unique
Username and Password (see Administrator, p. 22).
2005-09-07
15