ATEN PN9108U - Manual (Page 31)

Device Selector
Since up to 16 PN9108U Stations can be daisy
chained, this panel lists each of the Stations on
your installation. The number in brackets, to the
right of the title, indicates the total number of
stations on the installation.
The names of the Stations are listed in the list box
below the title. To select a Station for power
management, click on the arrow to drop the list down; then click to select the
Station you want to work with. When you select a Station, its Power Status
screen appears.
Note: 1. Each PN9108U’s Station ID is displayed in the Station ID LED on
its front panel (see p. 6).
2. The outlets in the Power Status panels are for the Station currently
selected in the Device Selector.
3. Clicking the Altusen logo will take you to the Altusen web page.
Device Control
With the exception of Status, the buttons in the
Device Control panel are used by the Administrator
to configure the power management options of the
Station that is currently selected in the Device
Selector panel. These functions are explained in
Chapter 4.
Clicking the Status button brings up the Power
Status screen for the currently selected device (see
Device Selector, above). The Power Status Screen is
discussed in the next section.
2005-09-07
Chapter 3 - Browser Operation
17