ATEN PN9108U User Manual
Page 33
The Information Panel:
The information panel shows the Outlet’s name and currently selected power
option. These parameters are set by the Administrator with the Configuration
function (see p. 27 for details).
Reboot:
If Reboot is enabled (by putting a check in the checkbox), the computer attached
to the Outlet’s corresponding port will reboot instead of shutting off when the
Power Button is clicked to turn the outlet off. This selection is disabled (grayed
out) if the Outlet isn’t configured for a Safe Shutdown capable option. See
Configuration, p. 27, for further details.
Note: This function only works with computers capable of a Safe Power
Shutdown. See step 3 of Single Stage Installation, p 12, and Safe
Shutdown and Reboot, p. 12.
2005-09-07
Chapter 3 - Browser Operation
19