ATEN PN9108U - Manual (Page 43)

Heading Meaning
Kill the Power If this option is selected, the PN9108U waits for the
amount time set in the Power Off Delay field (see
below), and then turns the Outlet’s power OFF when its
Power Button is clicked to turn off the power. Turning the
power off performs a cold (non-safe) shutdown. Selecting
this function disables the Reboot checkbox on the main
screen.
Confirmation Required If this option is enabled (there is a check in the
checkbox), a dialog box comes up asking you to
confirm the operation before it is performed. If it is
disabled (there is no check in the checkbox), the
operation is performed without confirmation.
Power On Delay Sets the amount of time the PN9108U waits after the
Power Button is clicked before it turns on the computer
attached to the corresponding outlet.
Power Off Delay Sets the amount of time the PN9108U waits after the
Power Button is clicked before it shuts down the
computer attached to the corresponding outlet.
After the delay time expires, the PN9108U waits
another fifteen seconds, then shuts the computer down.
The default delay time is 15 seconds. The maximum
delay time is 999 seconds.
To save your settings and exit, Click Save. To exit without saving your
changes, use your browser’s Back function to go back to the Main web page,
or click another button on the page to go to a different function.
* This function only works with computers capable of a Safe Power
Shutdown. See step 3 of Single Stage Installation, p 12, and Safe
Shutdown and Reboot, p. 12.
2005-09-07
Chapter 4 - Administration
29