HP LaserJet 4345 Multifunction Printer series - Manual (Page 212)

14. Reinstall the output-bin assembly, the 3-bin mailbox, or the stapler/stacker. Insert the
device at an angle, and then slide it into the MFP.
15. If a jam message persists, jammed media is still in the MFP. Look for the jam in another
location.
Clearing jams from the ADF
Use this procedure to clear jams from the ADF.
1. Lift the ADF-input tray, and check for jammed media underneath the tray. Carefully
remove any jammed media.
2. Pull up on the ADF-cover-release lever, and open the ADF cover. Carefully remove any
jammed media.
3. Lift up on the ADF-document guide, and check for jammed media. Carefully remove any
jammed media.
198 Chapter 10 Solving problems ENWW