HP LaserJet 4345 Multifunction Printer series - Manual (Page 70)

Values Explanation
EDGE-TO-EDGE COPIES Indicates whether copies are printed edge-to-edge (within 2 mm,
or 0.08 inch, of the edge of the paper) or whether they have the
normal, unprintable border (6.35 mm, or 0.25 inch).
AUDIBLE FEEDBACK Gives an audible indication when you press a button or when you
touch an interactive area of the touchscreen.
MBM-3 Configuration submenu
Use the items in this menu to set up the output bins on the 3-bin mailbox.
To gain access to this menu, touch CONFIGURE DEVICE, and then touch MBM-3
CONFIGURATION.
Note This menu appears only when the 3-bin mailbox is installed.
Item Values Explanation
OPERATION MODE FUNCTION SEPARATOR
MAILBOX*
STACKER
Select the operation mode that
you want to use. For more
information, see
3-bin mailbox .
Note
The MFP restarts automatically
whenever the operation mode
is changed.
Stapler/stacker submenu
Use the items in this menu to configure the stapling options.
To gain access to this menu, touch CONFIGURE DEVICE, and then touch STAPLER/
STACKER.
Note This menu appears only when the stapler/stacker is installed.
Item Values Explanation
STAPLE ONE
NONE*
To enable stapling, select ONE.
Note
Printer-driver settings override
control-panel settings.
STAPLES OUT STOP*
CONTINUE
Use this item to configure the
MFP to either stop or continue
when the staple cartridge is
empty. If you select
CONTINUE, jobs are stacked
in the output bin, but they are
not stapled.
56 Chapter 2 Using the control panel ENWW