HP LaserJet 4345 Multifunction Printer series - Manual (Page 59)

Item Values Explanation
DEFAULT PAPER SIZE LETTER*
LEGAL
EXECUTIVE
8.5X13
A4
A5
B5(JIS)
EXECUTIVE(JIS)
DPOSTCARD(JIS)
16K
ENVELOPE #10
ENVELOPE MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
Set the default image size for
paper and envelopes. (The
item name will change from
PAPER to ENVELOPE as you
scroll through the available
sizes.)
DEFAULT CUSTOM PAPER
SIZE UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Allows you to set a custom
paper size for any of the
installed trays. Substitute the
tray number for <N>. Select the
X and Y dimensions of the
custom paper size.
PAPER DESTINATION OUTPUT BIN 1*
OUTPUT BIN 2
OUTPUT BIN 3
Select the output bin on the
optional 3-bin mailbox.
Note
This item appears only if an
optional 3-bin mailbox is
installed, and if it is not
configured for stacker mode.
DUPLEX OFF*
ON
Set the value to ON to print on
both sides (duplex) or OFF to
print on one side (simplex) of a
sheet of paper.
For more information, see
Printing on both sides of paper
(optional duplexer)
.
OVERRIDE A4/LETTER YES*
NO
This command is used to print
on Letter-size media when an
A4 job is sent but no A4-size
media is loaded in the MFP (or
to print on A4-size media when
a Letter job is sent, but no
Letter-size media is loaded in
the MFP).
ENWW Configure device menu 45