HP LaserJet 4345 Multifunction Printer series - Manual (Page 65)

Item Values Explanation
AUTO CLEANING ON*
OFF
When auto-cleaning is on, the
MFP prints a cleaning page
when the page count reaches
the value set in CLEANING
INTERVAL.
CLEANING INTERVAL 1000
2000
5000
10000
20000
Select the frequency that you
want the MFP to automatically
print a cleaning page.
AUTO CLEANING SIZE LETTER
A4
Use this item to specify the
paper size that the MFP uses
to print the cleaning page.
PROCESS CLEANING PAGE No value to select Use this item to clean the fuser.
The cleaning process might
take up to 2.5 minutes.
System setup submenu
Items in this menu affect the MFP function. Configure the MFP according to your printing
needs.
To gain access to this menu, touch CONFIGURE DEVICE, and then touch SYSTEM SETUP.
Item Values Explanation
DATE/TIME DATE
DATE FORMAT
TIME
TIME FORMAT
Sets the start date and time for
the MFP.
JOB STORAGE LIMIT 1 to 100 Specifies the number of
QuickCopy and Proof-and-Hold
jobs that can be stored on the
MFP hard-disk accessory.
JOB HELD TIMEOUT OFF*
1 HOUR
4 HOURS
1 DAY
1 WEEK
Sets the amount of time that
QuickCopy and proof-and-hold
jobs are kept before being
automatically deleted from the
queue.
If you change the Job Held
Timeout value, only jobs that
are stored after this change are
affected by the change. Any
jobs that were stored before
you changed the value will
retain the original timeout
setting.
ENWW Configure device menu 51