HP LaserJet 4345 Multifunction Printer series - Manual (Page 73)

Item Options Values Explanation
TCP/IP ENABLE ON
OFF
ON: (default) Enable the TCP/IP
protocol.
OFF: Disable the TCP/IP protocol.
HOST NAME An alphanumeric string, up to 32
characters, that is used to identify the
device. This name is listed on the
Jetdirect configuration page. The
default host name is NPIxxxxxx,
where xxxxxx is the last six digits of
the LAN hardware (MAC) address.
CONFIG
METHOD BOOTP
DHCP
AUTO IP
MANUAL
Select BOOTP (Bootstrap Protocol)
for automatic configuration from a
BootP server.
Select DHCP (Dynamic Host
Configuration Protocol) for automatic
configuration from a DHCP server.
Select AUTO IP for automatic link-
local IP addressing. An address in the
form 169.254.x.x will be automatically
assigned.
Use the MANUAL settings menu to
configure TCP/IP parameters.
MANUAL IP ADDRESS
SUBNET MASK
SYSLOG
SERVER
DEFAULT
GATEWAY
IDLE TIMEOUT
IP ADDRESS: The unique IP address
of the MFP.
SUBNET MASK: The subnet mask for
the MFP.
SYSLOG SERVER: The IP address of
the syslog server used to receive and
log syslog messages.
DEFAULT GATEWAY: The IP
address of the gateway or router used
for communications with other
networks.
IDLE TIMEOUT: The time period, in
seconds, after which an idle TCP print
data connection is closed. (The
default is 270 seconds).
ENWW Configure device menu 59