HP LaserJet 4345 Multifunction Printer series - Manual (Page 38)

10. Adjust the media guides so they lightly touch the media stack, but do not bend the media.
11. Make sure the media fits under the tabs on the guides and not above the load level
indicators.
Note If printing on long media also pull out the tray extension until it stops.
12. Touch EXIT to exit the menus. The tray is ready to use.
Loading trays 2, 3, 4 and 5
Trays 2 , 3, 4, and 5 hold up to 500 sheets of standard media. For information about paper
specifications, see
Supported types and sizes of print media .
The following are the detectable standard sizes, which are marked inside the tray:
● A4
● Letter
● Legal
● Executive
● B5 (JIS)
● A5
The following are the undetectable standard sizes:
● 16K
● Executive (JIS)
● 8.5 x 13 (216 x 330 mm).
When loading undectable sizes, you need to manually set the size at the control panel. For
information about loading custom-size media, see
Loading custom-size media in trays 2, 3,
4, and 5 .
CAUTION To avoid a jam, never add or remove paper from a tray while printing from that tray.
To load standard-size media in trays 2, 3, 4, and 5
Note Do not load envelopes in trays 2, 3, 4, or 5. Use only tray 1 for printing on envelopes.
24 Chapter 1 MFP basics ENWW