Vaisala DM500 - Manual (Page 117)

Chapter 18 _____________________________________________________________ Maintenance
VAISALA ______________________________________________________________________ 115
Error Messages
Error Message Interpretation and Action
Please check that the cooling air/water
temperatures and flows are correct, see chapter
Setting up for Operation
, page 35. Check that
cooling method (air/water) setting is correct, page
60.
In case of constant error, please contact Vaisala,
see page 19.
Please check that the cooling air/water
temperatures and flows are correct, see chapter
Setting up for Operation
, page 35. Check that
cooling method (air/water) setting is correct, page
60.
In case of constant error, please contact Vaisala,
see page 19.
Clean the sensor, see page 113.
In case of constant error, please contact Vaisala,
see page 19.
Clean the sensor, see page 113.
In case of constant error, please contact Vaisala,
see page 19.
Clean the sensor thoroughly using distilled water,
see page 113
In case of constant error, please contact Vaisala,
see page 19.
DMI500 restarted due to an internal failure *
Please contact Vaisala, send the device for repair,
page 19.
User settings damaged. Factory settings reverted*
In case of constant error, please contact Vaisala,
see page 19.