Vaisala DM500 - Manual (Page 71)

Chapter 13 ___________________________________________________________Recording Data
VAISALA _______________________________________________________________________ 69
CHAPTER 13
RECORDING DATA
This chapter provides instructions on data recording with the DM500.
Data Recording
You can record measurement data and view the recorded data on the
display.
1. Open MENU : press .
2. Select ► Recording/Viewing , press .
3. Select ► Record data , press .
4. Select Interval , press SET .
5. Set the measurement interval by selecting the interval time by
using the arrow buttons, press
SELECT . See the table below.
Note, you can not set longer interval than the measurement
duration !
6. Set the measurement duration (5 min, 15 min, 30 min, 1 hours, 3
hours, 12 hours, 24 hours, 7 days, 30 days, memory full) by
selecting
Duration , press SET . Note the maximum recording
durations are based on the measurement interval !
7. To start recording, select Start/Stop recording , press START . The
progress bar is shown on the display showing the amount
of recorded data.