Allied Telesis AT-IFS802SP/POE - Manual (Page 101)

97 AT-IFS802SP/POE(W)-80 User Manual
SystemLog, SMTP and Event Commands Set
Allied Telesis Commands Level Description Example
systemlog ip
[IP address]
G
Set System log server IP
address. switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G Specified the log mode switch(config)# systemlog mode both
show systemlog E Displays system log. Switch>show systemlog
show systemlog P
Show system log client &
server information
switch#show systemlog
no systemlog G Disable systemlog functon switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address]
G Configure SMTP server IP
switch(config)#smtp serverip
192.168.1.5
smtp sender
[sendername]
G Configure sender of mail
switch(config)#smtp snder aaa@bbb.
com
smtp authentication G
Enable SMTP
authentication
switch(config)#smtp authentication
smtp account
[account]
G
Configure authentication
account
switch(config)#smtp account John
smtp password
[password]
G
Configure authentication
password
switch(config)#smtp password 1234
smtp rcptemail
[Index] [Email address]
G
Configure Rcpt e-mail
Address switch(config)#smtp rcptemail 1
[email protected]
show smtp P
Show the information of
SMTP
switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both] G Set cold start event type
switch(config)#event device-cold-start
both
event authentication-failure
[Systemlog|SMTP|Both] G
Set Authentication failure
event type switch(config)#event authentication-
failure both
event ring-topology-change
[Systemlog|SMTP|Both] G
Set X-ring topology
changed event type switch(config)#event ring-topology-
change both
event systemlog
[Link-UP|Link-Down|Both]
I
Set port event for system
log
switch(config)#interface fastethernet 3
switch(config-if)#event systemlog both
event smtp
[Link-UP|Link-Down|Both]
I Set port event for SMTP
switch(config)#interface fastethernet 3
switch(config-if)#event smtp both
show event P Show event selection switch#show event