3 wall mount plate mounting – Allied Telesis AT-IFS802SP/POE User Manual
Page 19
Advertising
15
AT-IFS802SP/POE(W)-80 User Manual
3.3 Wall Mount Plate Mounting
Follow the steps below to mount the industrial switch with wall mount plate.
Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.
1.
Place the wall mount plate on the rear panel of the industrial switch.
2.
Use the screws to screw the wall mount plate on the industrial switch.
3.
Use the hook holes at the corners of the wall mount plate to hang the industrial switch on the wall.
4.
To remove the wall mount plate, reverse the above steps.
5.
Advertising