Allied Telesis AT-IFS802SP/POE - Manual (Page 91)

87 AT-IFS802SP/POE(W)-80 User Manual
stp-path-priority
[Port Priority]
I
Use the spanning-tree
port-priority interface
configuration command to
configure a port priority
that
is used when two switches
tie for position as the root
switch.
switch(config)#interface fastEthernet 2
switch(config-if)#stp-path-priority 128
stp-admin-p2p
[Auto|True|False]
I
Admin P2P of STP priority
on this interface. switch(config)#interface fastEthernet 2
switch(config-if)#stp-admin-p2p Auto
stp-admin-edge
[True|False]
I
Admin Edge of STP priority
on this interface. switch(config)#interface fastEthernet 2
switch(config-if)#stp-admin-edge True
stp-admin-non-stp
[True|False]
I
Admin NonSTP of STP
priority on this interface. switch(config)#interface fastEthernet 2
switch(config-if)#stp-admin-non-stp False
show spanning-tree E
Displays a summary of the
spanning-tree states.
switch>show spanning-tree
no spanning-tree G Disable spanning-tree. switch(config)#no spanning-tree