Allied Telesis AT-IFS802SP/POE - Manual (Page 98)

94 AT-IFS802SP/POE(W)-80 User Manual
802.1x Commands Set
Allied Telesis Commands Level Description Example
8021x enable G
Use the 802.1x global
configuration command to
enable 802.1x protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G
Use the 802.1x
system radius IP global
configuration command to
change the radius server IP.
switch(config)# 8021x system radiusip
192.168.1.1
8021x system
serverport
[port ID]
G
Use the 802.1x system
server port global
configuration command to
change the radius server
port
switch(config)# 8021x system serverport
1812
accountport
[port ID]
G
Use the 802.1x system
account port global
configuration command to
change the accounting port
switch(config)# 8021x system accountport
1813
8021x system
sharedkey
[ID]
G
Use the 802.1x system
share key global
configuration command to
change the shared key value.
switch(config)# 8021x system sharedkey
123456
8021x system nasid
[words]
G
Use the 802.1x system
nasid global configuration
command to change the
NAS ID
switch(config)# 8021x system nasid test1
8021x misc
quietperiod
[sec.]
G
Use the 802.1x misc quiet
period global configuration
command to specify the
quiet period value of the
switch. switch(config)# 8021x misc quietperiod 10
8021x misc txperiod
[sec.]
G
Use the 802.1x misc TX
period global configuration
command to set the TX
period.
switch(config)# 8021x misc txperiod 5
8021x misc
supptimeout
[sec.]
G
Use the 802.1x misc supp
timeout global configuration
command to set the
supplicant timeout.
switch(config)# 8021x misc supptimeout
20
8021x misc
servertimeout [sec.]
G
Use the 802.1x misc server
timeout global configuration
command to set the server
timeout.
switch(config)#8021x misc servertimeout
20