17 rate limiting – Allied Telesis AT-IFS802SP/POE User Manual
Page 53
49
AT-IFS802SP/POE(W)-80 User Manual
6.17 Rate Limiting
You can set up every port’s bandwidth rate and frame limitation type.
Ingress Limit Frame type
•
: select the frame type that wants to filter. There are four frame types
for selecting:
All
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only types
are only for ingress frames. The egress rate only supports
All type.
>
>
>
>
Rate Limiting interface
All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps,
•
users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the
ingress rate by packet counter to meet the specified rate
Ingress: Enter the port effective ingress rate (The default value is “0”).
Egress: Enter the port effective egress rate (The default value is “0”).
And then, click to apply the settings
•
>
>
Apply