Allied Telesis AT-IFS802SP/POE - Manual (Page 65)

61 AT-IFS802SP/POE(W)-80 User Manual
Use a strict priority scheme: Always the higher queue will be processed first, except the
higher queue is empty.
Priority Type: There are 5 priority type selections available—Port-based, TOS only, COS
only, TOS first, and COS first. Disable means no priority type is selected.
Click to have the configuration take effect.
Click to have the configuration take effect. •
>
>
Apply
Configure the priority level for each port. With the drop-down selection item of Priority
Type above being selected as Port-based, this control item will then be available to set the
queuing policy for each port.
Port x • : Each port has 4 priority levels—High, Middle, Low, and Lowest—to be chosen.
Click to have the configuration take effect. •
6.21.2 Port-based Priority
Apply
QoS Configuration interface