Allied Telesis AT-IFS802SP/POE User Manual
Page 37
33
AT-IFS802SP/POE(W)-80 User Manual
Syslog Configuration interface
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across the network. You
can configure the SMTP server IP, mail subject, sender, mail account, password, and the recipient email
addresses which the e-mail alert will send to. There are also five types of event—Device Cold Start,
Device Warm Start, Authentication Failure, X-Ring Topology Change, and Port Event—available to be
issued as the e-mail alert. Besides, this function provides the authentication mechanism including an
authentication step through which the client effectively logs in to the SMTP server during the process
of sending e-mail alert.
Email Alert
•
: With this function being enabled, the user is allowed to configure the detail settings
for sending the e-mail alert to the SMTP server when the events occur.
SMTP Server IP
•
: Assign the mail server IP address (when Email Alert is enabled, this function
will then be available).
Sender
•
: Type in an alias of the switch in complete email address format, e.g. [email protected],
to identify where the e-mail alert comes from.
Authentication
•
: Having ticked this checkbox, the mail account, password and confirm password
column fields will then show up. Configure the email account and password for authentication
when this switch logs in to the SMTP server.
Mail Account
•
: Set up the email account, e.g. johnadmin, to receive the email alert. It must be an
existing email account on the mail server.
Password:
•
Type in the password for the email account.
Confirm Password: Reconfirm the password.
•
Rcpt e-mail Address 1 ~ 6:
•
You can also fill each of the column fields with up to 6 e-mail
accounts to receive the email alert.
Click to have the configuration take effect.
•
6.8.2 System Event Log—SMTP Configuration
Apply