4 wiring the power inputs – Allied Telesis AT-IFS802SP/POE User Manual
Page 20
Advertising
16
AT-IFS802SP/POE(W)-80 User Manual
3.4 Wiring the Power Inputs
Please follow the steps below to insert the power wire.
Insert AC or DC power wires into the contacts 1 and 2 for power 1, or 5 and 6 for power.
1.
Tighten the wire-clamp screws for preventing the wires from loosing.
2.
[note]
The wire gauge for the terminal block should be in the range between 12 ~ 24
AWG.
Advertising