Allied Telesis AT-IFS802SP/POE - Manual (Page 13)

9 AT-IFS802SP/POE(W)-80 User Manual
Login Security Supports IEEE802.1X Authentication/RADIUS
Bandwidth
Control
Support ingress packet filter and egress packet limit
The egress rate control supports all of packet type and the limit rates are
100K~102400Kbps(10/100), 100K~256000Kbps(1000)
Ingress filter packet type combination rules are Broadcast/Multicast/Unknown
Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all of
packet. The packet filter rate can be set from 100K~102400Kbps(10/100),
100K~256000Kbps(1000)
Flow Control Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
System Log Supports System log record and remote system log server
SMTP Supports SMTP Server and 6 e-mail accounts for receiving event alert
Relay Alarm
Provides one relay output for port breakdown, power fail
Alarm Relay current carry ability: 1A @ DC24V
SNMP Trap
1. Cold start
2. Link up/down
3. X-Ring topology changed
4. Authorization fail
5. PD disconnect trap-PoE port event
DHCP Provides DHCP Client/ DHCP Server/ Port and IP Binding
DNS Provides DNS client feature and supports Primary and Secondary DNS server
SNTP Supports SNTP to synchronize system clock in Internet
Firmware Update Supports TFTP firmware update, TFTP backup and restore.
Configuration
Upload/Download
Supports binary format file for configuration backup and restore
ifAlias
Each port allows importing 128bits of alphabetic string of word on SNMP and
CLI interface
1.3 Package Contents
Please refer to the package content list below to verify them against the checklist.
8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo with 8 PoE Injectors Managed Industrial Switch x 1 •
Pluggable Terminal Block x 1 •
Mounting plate x 2 •
RJ-45 to DB9-Female cable x 1 •
Compare the contents of the industrial switch with the standard checklist above. If any item is damaged
or missing, please contact the local dealer for service.