Allied Telesis AT-IFS802SP/POE - Manual (Page 103)

99 AT-IFS802SP/POE(W)-80 User Manual
SNTP Commands Set
Allied Telesis Commands Level Description Example
sntp enable G Enable SNTP function switch(config)#sntp enable
sntp daylight G
Enable daylight saving time,
if SNTP function is inactive,
this command can’t be
applied.
switch(config)#sntp daylight
sntp daylight-period
[Start time] [End time]
G
Set period of daylight
saving time, if SNTP
function is inactive, this
command can’t be applied.
Parameter format:
[yyyymmdd-hh:mm]
switch(config)# sntp daylight-period
20060101-01:01 20060202-01:01
sntp daylight-offset
[Minute]
G
Set offset of daylight saving
time, if SNTP function is
inactive, this command
can’t be applied.
switch(config)#sntp daylight-offset 3
sntp ip
[IP]
G
Set SNTP server IP, if
SNTP function is inactive,
this command can’t be
applied.
switch(config)#sntp ip 192.169.1.1
sntp timezone
[Timezone]
G
Set timezone index, use
“show sntp timzezone”
command to get more
information of index
number
switch(config)#sntp timezone 22
show sntp P Show SNTP information switch#show sntp
sntp sync-interval
[Secs]
G
Set synchronization
interval
switch(config)#sntp sync-interval 64
show sntp timezone P
Show index number of
time zone list
switch#show sntp timezone
no sntp G Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight saving time switch(config)#no sntp daylight