Allied Telesis AT-IFS802SP/POE - Manual (Page 71)

67 AT-IFS802SP/POE(W)-80 User Manual
Quiet Period: • Set the period which the port doesn’t try to acquire a supplicant.
TX Period • : Set the period port waits for retransmit next EAPOL PDU during an
authentication session.
Supplicant Timeout
• : Set the period of time the switch waits for a supplicant response to
an EAP request.
Server Timeout
• : Set the period of time the switch waits for a server response to an
authentication request.
Max Requests
• : Set the number of authentication that must time-out before authentication
fails and the authentication session ends.
Reauth period
• : Set the period of time which clients connected must be re-authenticated.
Click . •
6.25.3 Misc Configuration
Apply
802.1x Misc Configuration interface
6.26 MAC Address Table
Use the MAC address table to ensure the port security.
You can add a static MAC address that remains in the switch’s address table regardless of
whether the device is physically connected to the switch. This saves the switch from having to
re-learn a device’s MAC address when the disconnected or powered-off device is active on the
network again. Via this interface, you can add / modify / delete a static MAC address.
6.26.1 Static MAC Address