Document Outline

• Installing and Configuring the Avaya S8700 or S8710 Media Server
• Contents
• About This Documentation
  • Audience
  • Using this documentation
  • Conventions
    • General
    • Physical dimensions
    • Terminology
    • Typography
      • Commands
      • Keys
      • User input
      • System output and field names
  • Downloading this book and updates from the Web
    • Downloading this documentation
  • Safety labels and security alert labels
  • Related resources
  • Technical assistance
    • Within the US
    • International
  • Trademarks
  • Sending us comments
• 1 Introduction
  • Pre-installation information
    • Before you go on site
      • Downloading license and Avaya authentication files
      • Copying files to the laptop
    • Before you start the installation
  • Equipment specifications
  • Required hardware
  • Documentation
  • Connecting to the customer’s network
  • Connecting the USB modems
    • Connecting to collocated servers
    • Connecting to separated servers
  • High level overview of installation process
    • Installing and cabling the media server complex
    • Installing Avaya Communication Manager
    • Configuring the media server
    • Translating the IPSIs
    • Installing and cabling the media gateways
    • Completing the installation administration
    • Testing the complete installation
• 2 Configuring the hardware in the rack
  • Configuring the SNMP modules in the UPS
    • Single control network
    • Duplicated control network
    • Setting selected traps (alarming)
  • Configuring the SNMP subagent in the Avaya Ethernet switch (if used)
  • Configuring the media server
    • Clearing the ARP cache on the laptop
    • Powering up the media server
    • Accessing the media server
    • Setting up Telnet
    • Installing Avaya Communication Manager
    • Using the Installation Wizard
    • Verifying media server connection to the customer’s LAN (if provided)
    • Configuring the modem
    • Testing the media server LEDs
    • Disconnecting from the media server
  • Configuring second media server
• 3 Translating the IPSIs
  • Starting terminal emulation
  • Inputing translations
  • Resetting the media server
  • Adding media gateways
  • Administering the IPSIs
    • Adding IPSI information
    • Enabling IPSI duplication (duplicated control network only)
    • Setting alarm activation level
    • Installing the translation file
• 4 Connecting to the IPSIs
  • Programming the IPSI circuit packs
    • Using DHCP addressing
    • Using static addressing
  • Verifying that IPSIs are translated
  • Verifying connectivity to media server
  • Upgrading IPSI firmware version (if necessary)
  • Enabling control of IPSIs
  • Verifying license status
  • Reusing a TN2312AP/BP circuit pack
• 5 Completing the installation administration
  • Verifying translations
  • Setting daylight savings time rules
  • Setting locations (if necessary)
  • Verifying date and time
  • Resolving alarms
  • Enabling and disabling Ethernet switch ports
  • Backing up files to the compact flash media (S8710 only)
  • Backing up files to the PCMCIA flashcard (S8700 only)
  • Telneting to media server
  • Enabling alarms
    • To INADS via modem
    • To INADS via SNMP
    • To INADS on second server
  • Registering the system
• 6 Installing the media gateways
• 7 Testing the media server installation
  • Testing the TN2312BP IPSI circuit pack
  • Testing the license file
  • LED indicators
    • S8700 Media Server LEDs
      • Testing the media server LEDs
      • Interpreting the test results
      • LEDs on the back of the media server
    • S8710 Media Server LEDs
    • Avaya Ethernet switch LEDs
    • Uninterruptible power supply LEDs
    • IPSI LEDs
• A Accessing the media server
  • Connecting to the media server directly
  • Connecting to the media server remotely over the network
  • Connecting to the media server remotely over a modem
    • Setting up a dial-up connection
    • Dialing up to the media server
    • Finding the active media server IP address
  • Accessing the Maintenance Web Interface
  • Using the command line interface
  • Logins
  • Network configuration
  • Browser settings
    • Connecting directly to the media server
    • Connecting remotely through the network
• B Troubleshooting an installation
  • Installing the media server hardware
  • Configuring the media server hardware
  • Installing the license and Avaya authentication files
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • H
  • I
  • K
  • L
  • M
  • P
  • R
  • S
  • T
  • U
  • V