A&D Digital Platform Scales HW-10KGV - Manual (Page 12)

HW-G Instruction Manual Page 10
HW-G OZIM v1a
Select the place where you intend to instal the scale.
Consider “4. Caution” on page 8.
Step 5 Level the Scale
Level the base unit by using the “Bubble spirit level”
and “Levelling feet”.
Step 6 Adjust the Display Unit
Press the caps at the pole top from both sides and
adjust the angle of the display unit.
Step 7 Connect the Power
Install the batteries (see page 11) or connect the AC
adaptor or mains cable. Check the weighing accuracy.
If the scale needs calibration, refer to “14 Calibration”.
Bubble spirit level
Leveling foot
OK NG
Step 5
Step 6