A&D Digital Platform Scales HW-10KGV - Manual (Page 23)

HW-G Instruction Manual Page 21
HW-G OZIM v1a
Counting Mode
8 Counting Mode
In counting mode the total weight of articles is converted to a count and assumes
all articles have the same mass value.
It is necessary to store a unit mass to count articles.
8.1 Storing a Unit Mass
Step 1 Press the MODE switch to display the unit PCS .
Step 2 Press the SET switch to enter the mode to store
a unit mass.
Step 3 Press the ^ switch to select the number of
samples. The greater the quantity of samples, the
greater the accuracy of the count. Select from
5 pieces, 10 pieces, 20 pieces, 50 pieces, 100
pieces
Step 4 Put the container onto the pan.
Press the TARE switch.
Step 5 Put in the number of samples selected at step 3.
Press the ENTER switch to store the weight after
the stability mark is displayed. The count is then
displayed.
Caution
When the sample is too light and it is not
possible to
calculate a unit mass, the scale displays
lo ut
and
returns to step 3. It is necessary to increase the
number of samples.
Pressing the
ENTER switch after the
lo ut .
is
displayed, the next unit is displayed.
When the unit mass is too light to store, the scale
displays
lo ut .
Step 4 Remove all items from the pan.