2 operation and performance (examples), Example 1, Example 2 – A&D Digital Platform Scales HW-10KGV User Manual
Page 29
HW-G Instruction Manual Page 27
HW-G OZIM v1a
10.2 Operation and Performance (Examples)
Example 1
Weighing each article, the scale makes the accumulation according to
f8 3
.
Step 1 Press the
MODE
switch to display
M+
or
.
Step 2 Press the
ZERO
switch to reset the accumulation data.
Step 3 Return to the kg mode using the
MODE
switch.
Press the
ZERO
switch with nothing on the pan.
Step 4 Put an article on the pan. Wait for the stability mark to be displayed and the
value to blink. Remove the article and, if necessary, press the
ZERO
switch.
Step 5 Weigh additional articles using step 4.
Step 6
Press the
MODE
switch to display the number of articles and total mass with
M+
or
displayed.
Example 2
This example accumulates the articles that were removed from the pan. The
function parameter is set to
f8 4
.
Step 1 Enter into the kg mode using the
MODE
switch.
Put all articles on the pan and press the
TARE
switch.
Step 2 Press the
MODE
switch to display
M+
or
.
Step 3 Press the
ZERO
switch to reset the accumulation data.
Retun to kg mode with the
MODE
switch.
Step 4 Remove an article from the pan. Wait for the stability mark to be displayed and
the value to be blinking. Press the
TARE
switch.
Step 5 Remove additional articles using step 4.
Step 6 Press the
MODE
switch to display the number of articles and total mass
removed, with
M+
or
displayed.