A&D Digital Platform Scales HW-10KGV - Manual (Page 13)

HW-G Instruction Manual Page 11
HW-G OZIM v1a
5.1 Installing the Batteries for Type L
Step 1 If necessary turn off the display
and remove the AC adaptor.
Step 2 Press and slide downwards to remove the
external cover.
Press the hook of the internal cover to the
left side and lift off the cover.
Step 3 Insert six new dry cells ensuring correct
polarity (+,-). Battery size is ‘D’.
Step 4 Replace the covers removed in step 2.
Caution
Replace used dry cells with six new ones, when BATT is displayed.
Do not mix used and new batteries. It may cause damage to the battery
or product.
Check the polarity when installing the batteries. If you do not observe
this it may cause battery leakage. Also if the polarity of a battery is
wrong the scale may only work temporarily.
The battery life is dependent upon the environmental temperature.
Remove batteries from the display unit when the scale is not to be used
for a long time. They may leak and cause damage.
Damage which is due to battery leakage is not covered under warranty.