A&D Digital Platform Scales HW-10KGV - Manual (Page 47)

HW-G Instruction Manual Page 45
HW-G OZIM v1a
Item Display Meaning and purpose
?
Comparator When the display value becomes stable after pressing the
SET
switch, the scale compares the display value. It does not
f6 4
compare on an unstable condition. If the
SET
switch is pressed
again, the scale stops the comparison.
When the display value becomes stable, the scale compares
f6 5
the display value. It does not compare on an unstable
condition.
When the display value becomes stable and not near-zero
after pressing the
SET switch, the scale compares the display
f6 6
value. It does not compare on an unstable condition. If the SET
switch is pressed again, the scale stops the comparison.
f6 7
When the display value becomes stable when not near-zero,
the scale compares the value.
f6 8
Simple batch function. (Refer to section 13.)
f6 9
Full/dribble batch function. (Refer to section 12.)
Buzzer The condition of the buzzer on option OP-03 by comparator
function or full/dribble batch function.
f7 0
# No buzzer.
f7 1
The buzzer sounds at LO.
f7 2
The buzzer sounds at OK.
f7 3
The buzzer sounds at LO and OK.
f7 4
The buzzer sounds at HI.
f7 5
The buzzer sounds at LO and HI.
f7 6
The buzzer sounds at OK and HI.
f7 7
The buzzer sounds at LO, OK and HI.
f7 8
The buzzer sounds at finishing the full/dribble batch process.
Accumulator The condition of the accumulator
f8 0
# Accumulator is not used.
The scale accumulates the data, if the
F
switch is pressed,
f8 1
when the display becomes a positive stable value above
near-zero. Next accumulation can be performed after the
display becomes near-zero or a negative value.
The scale accumulates the data, if the
F
switch is pressed,
f8 2
when the display becomes a stable value outside near-zero.
Next accumulation can be performed after the display be
comes near-zero.
When the display becomes a positive stable value, the scale
f8 3
accumulates the data automatically. Next accumulation can
be performed after the display becomes near-zero or a
nega tive value.