Aastra Telecom 9480i Series - Manual (Page 1143)

Creating an XML Application
41-001160-03, Rev 00, Release 2.4 F-67
The following are examples of using the the “remote”, “local”, and “override”
values with the setType attribute and the AastraIPPhoneConfiguration object.
Remote Setting Examples (default)
The following are examples that are the same as using setType=”remote” setting
for a specific configuration item (softkey1 label).
<AastraIPPhoneConfiguration>
<ConfigurationItem>
<Parameter>softkey1 label</Parameter>
<Value>Test</Value>
</ConfigurationItem>
</AastraIPPhoneConfigutation>
or
<AastraIPPhoneConfiguration setType="remote">
<ConfigurationItem>
<Parameter>softkey1 label</Parameter>
<Value>Test</Value>
</ConfigurationItem>
</AastraIPPhoneConfigutation>
RESULT: If the value for "softkey1 label" is not specified via the configuration
files, or another setType="remote" setting, the XML examples shown above
assign the value of "Test". This value is lost when the phone reboots. If the value
for "softkey1 label" has been specified locally, these XML examples do not
change that value.
Notes:
1. If you enter a value for the “setType” attribute in the root tag of the
AastraIPPhoneConfiguration object, the setting affects all of the
configuration parameters and their sub-elements.
2.
If you enter a value for the “setType” attribute for a single
configuration item, the setting affects on that configuration item and its
sub-elements.
Draft 1