Group paging rtp settings, Example, Group paging – Aastra Telecom 9480i Series User Manual
Page 953: Rtp settings, Draft 1
Operational, Basic, and Advanced Parameters
41-001160-03, Rev 00, Release 2.4
A-179
Group Paging RTP Settings
Example
The following is an example of configuring RTP streaming for Paging
applications using the configuration files:
paging addr list: 224.0.0.2:10000,239.0.1.20:15000
softkey1 type: multicast
softkey1 label: Group 1
softkey1 value: 224.0.0.2:10000,239.0.1.20:15000
Parameter –
paging addr list
Aastra Web UI:
Basic Settings->Preferences->
Group Paging RTP Settings
Configuration Files aastra.cfg, <mac>.cfg
Description
Specifies the multicast address(es) and the port on which the phone
listens for incoming multicast RTP packets.
Note: If this field is blank, Paging listening capability is disabled on the
phone.
Format
IP Address in dotted decimal format/Port #
Default Value
N/A
Range
N/A
Example
paging addr list: 224.0.0.2:10000,239.0.1.20:15000 0
Draft 1