Aastra Telecom 9480i Series - Manual (Page 928)

Operational, Basic, and Advanced Parameters
A-154 41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
DND Key Mode Settings
Example
The following is an example of configuring the mode for DND in the
configuration files:
dnd key mode: 2
softkey1 type: dnd
softkey1 states: idle connected incoming outgoing busy
In the above example, softkey 1 is configured for DND for line 1 only, with a
“custom” configuration. Pressing softkey 1 displays DND screens for which you
can customize on the phone.
Parameter –
dnd key mode Aastra Web UI: Basic Settings->Preferences->General
Configuration Files aastra.cfg, <mac>.cfg
Description Sets the mode for how the phone uses “do not disturb” (DND):
• account Sets DND for a specific account.
DND key toggles the account in focus on the
IP Phone UI, to ON or OFF.
• phone Sets DND ON for all accounts on the phone.
DND key toggles all accounts on the phone to ON or
OFF.
• custom Sets the phone to display custom screens after
pressing the DND key, that list the account(s)
on the phone. The user can select a specific
account for DND, turn DND ON for all accounts,
or turn DND OFF for all accounts.
Notes:
1.
If there is only one account configured on the phone, then the mode
setting is ignored and the phone behaves as if the mode was set to
“Phone”.
2. You must configure a DND key on the phone to use this feature. To
configure a DND key, see “Softkey/Programmable Key/Feature Key/
Expansion Module Key Parameters” on page A-192 .
Format Integer
Default Value 1 (phone)
Range 0 (account)
1 (phone)
2 (custom)
Example dnd key mode: 2
Draft 1