Aastra Telecom 9480i Series - Manual (Page 169)

Administrator Level Options
41-001160-03, Rev 00, Releaes 2.4 3-79
Administrator Options
HTTP Server HTTP Server http server The HTTP server’s IP address. This
will become effective after this
configuration file has been
downloaded into the phone.
Optional: You can also assign an
HTTP relative path to the HTTP
server. See the next parameter
(http path).
For more information, see Chapter
4,
“Configuration Server Protocol”
on page 4-108 .
HTTP Path HTTP Path http path Specifies the path name for which
the configuration files reside on the
HTTP server for downloading to the
IP Phone.
If the IP phone’s configuration and
firmware files are located in a
sub-directory beneath the server’s
root directory, the relative path to
that sub-directory should be entered
in this field.
For more information, see Chapter
4,
“Configuration Server Protocol”
on page 4-108 .
HTTP Port HTTP Port http port Specifies the HTTP port that the
server uses to load the
configuration to the phone over
HTTP.
For more information, see Chapter
4,
“Configuration Server Protocol”
on page 4-108 .
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files
Description
Draft 1