Draft 1 – Aastra Telecom 9480i Series User Manual
Page 356
Operational Features
5-58
41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Aastra Web UI
1
Click on Basic Settings->Preferences.
2
In the "Local Dial Plan" field, enter a valid local dial plan (up to 512 alphanumeric characters) for the
IP phone. Default is X+#|XX+*. Enter prepended digits or a “;”to present a secondary dial tone if
required.
Note: If a User enters a dial plan longer than 512 characters, or a parsing error occurs, the phone
uses the default dial plan of “x+#|xx+*”.
3
Enable the "Send Dial Plan Terminator" field by checking the check box. (Disable this field by
unchecking the box). Default is disabled.
4
In the "Digit Timeout (in seconds)" field, enter a timeout value. This is the length of time, in
seconds, he phone waits before dialing. Default is 4 seconds.
5
Click
to save your changes.
Draft 1