Aastra Telecom 9480i Series - Manual (Page 403)

Operational Features
41-001160-03, Rev 00, Releaes 2.4 5-105
Configuring Operational Features
Use the following procedures to configure Intercom calls on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files for outgoing Intercom, see Appendix A, the
section,
“Outgoing Intercom Settings” on page A-175.
For specific parameters you can set in the configuration files for incoming Intercom, see Appendix A, the
section,
“Incoming Intercom Settings” on page A-177.
Aastra Web UI
Outgoing intercom settings (9480i, 9480i CT, 6755i, 6757i, and 6757i CT only):
1 Click on Basic Settings->Preferences->Outgoing Intercom Settings.
2 Select an Intercom type for outgoing Intercom calls from the Type list box.
Valid values are Phone-Side, Server-Side, Off. Default is Off.
3 If Server-Side is selected, enter a prefix to add to the phone number in the "Prefix Code" field.
Note: For Sylantro servers, enter *96.
Draft 1