Aastra Telecom 9480i Series - Manual (Page 809)

Operational, Basic, and Advanced Parameters
41-001160-03, Rev 00, Release 2.4 A-35
HTTPS Server Certificate Validation Settings
Parameter–
https validate certificates
Validate Certificates
(in Web UI)
Configuration Files aastra.cfg, <mac>.cfg
IP Phone UI Options->Administrator Menu->
Configuration Server->HTTPS Settings->
Cert Validation
Aastra Web UI Advanced Settings->Network->HTTPS Settings
Description Enables or disables the HTTPS validation of certificates on the phone.
When this parameter is set to 1, the HTTPS client performs validation on
SSL certificates before accepting them.
Note: If you are using HTTPS as a configuration method, and use a self
signed certificate, you must set this parameter to “0” (disabled) before
upgrading to Release 2.3 of the IP Phones.
Format Boolean
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example https validate certificates: 0
Parameter–
https validate expires
Check Certificate
Expiration
(in Web UI)
Configuration Files aastra.cfg, <mac>.cfg
IP Phone UI Options->Administrator Menu->
Configuration Server->HTTPS Settings->
Cert Validation->Check Expires
Aastra Web UI Advanced Settings->Network->HTTPS Settings
Description Enables or disables the HTTPS validation of the expiration of the certificates.
When this parameter is set to 1, the HTTPS client verifies whether or not a
certificate has expired prior to accepting the certificate.
Note: If the “https validate expires” parameter is set to enable, the clock on
the phone must be set for the phone to accept the certificates.
Format Boolean
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example https validate expires: 0
Draft 1